-1994-2002   0-3" LIFT DODGE TRACK BAR -



--- FITS STOCK TO 3" LIFT TRUCKS                                                            
--- PRECISION HARDENED STAINLESS 1" UNIBALL BEARING       
--- BEARING IS TEFLON LINED AND WILL NOT CORRODE              
--- 100% BOLT IN REPLACEMENT                                                                
--- ADJUSTABLE FOR AXLE CENTERING                                                   
--- ALLOWS FOR 3" MORE SUSPENSION TRAVEL                               
--- BOTH ENDS ARE REBUILDABLE                                                              
--- 2000- 2002 2500-3500 TRUCKS MUST CHECK CLEARANCE
BEFORE ORDERING!!!!
clearance checking instructions below...

** COMPLETE KIT   $299.95 **

PLEASE INQUIRE ON LEAD TIME BEFORE ORDERING!!!

INSTALLATION INSTRUCTIONS


~Clearance checking~
On 2000- 2002, 2500 and 3500 trucks, the differential seems to be rotated more than previous
 years. If you have one of these trucks and you have a leveling kit the clearance will most
likely be ok, as long as you use the 2" longer bumpstops, which should come in the leveling kit.
If your truck is stock you can take a typical spray paint "rattle can" lid, fit it under the
bottom of the frame joint on the stock trackbar, and see if it look like the lid will clear the
differential under suspension compression. It will be close regardless, but the trucks having
an issue the cap will be just about touching the diff cover. My trackbar joint is the same diameter
as the "rattle can" lid. Please call me if you have questions regarding this
issue or need a recommendation for an alternate product. Thank you!
-Don Thuren