Image of Thuren Fabrication 2003-2012 Dodge Ram 3500 Front Track Bar
Image of Thuren Fabrication 2003-2012 Dodge Ram 3500 Front Track Bar Heim End
Image of Thuren Fabrication 2003-2012 Dodge Ram 3500 Front Track Bar Delrin End
Image of Thuren Fabrication 2003-2012 Dodge Ram 3500 Front Track Bar Delrin Bushing
Image of Thuren Fabrication 2003-2012 Dodge Ram 3500 Front Track Bar Heim Joint Only
Image of Thuren Fabrication 2003-2012 Dodge Ram 3500 Front Track Bar
Image of Thuren Fabrication 2003-2012 Dodge Ram 3500 Front Track Bar Heim End
Image of Thuren Fabrication 2003-2012 Dodge Ram 3500 Front Track Bar Delrin End
Image of Thuren Fabrication 2003-2012 Dodge Ram 3500 Front Track Bar Delrin Bushing
Image of Thuren Fabrication 2003-2012 Dodge Ram 3500 Front Track Bar Heim Joint Only

2003-2012 Dodge Ram 3500 Front Track Bar

SKU: TF-4LFTB-16MM

$400.00
/

If you are having any steering or handling issues, our Trackbar upgrade is the first place to start! Our Trackbar is designed to be very rigid, with as close to ZERO deflection as possible.

Often people will think that having a rigid track bar will give steering vibration and rattle, but this is simply not true, being that the Trackbar is the only support for the steering linkage. The less deflection in the Trackbar, the less deflection in the steering. Simple as that! 

  • If you have a 2003-2007 truck, read the below bolt size notice before ordering!!
  • Everything except the Heim Joint and hardware is manufactured in house from raw materials.
  • Made from 1.50"x3/8" wall 1026 DOM tube.
  • Delrin machined frame side bushing.
  • CNC machined form threaded Heim joint tube end.
  • Bead blast textured, then high quality Powder Coated.
  • Adjustable length (within spec)
  • Grease fitting for frame bushing.
  • Extreme duty FK Teflon lined rod end at axle side.
  • DOES NOT FUNCTION WITH LARGER AFTERMARKET DIFF COVERS!!!!!

**IMPORTANT NOTE: From 2003 to approximately 2007.5, these trucks used 14mm(shank size) bolts on both ends of the Trackbar. Then around the middle of 2007, some trucks were coming with a 14mm bolt on the frame side and a 16mm bolt on the axle side.

If you have a 2003-2007 truck and you're unsure if you have mismatched hardware, you should purchase the above 2008-2013 option with hardware included, and plan to possibly drill out the mounting flange(s) to a bigger 5/8"(16mm) hole.

Regardless, If you have a 2003-2007 truck, we highly recommend you upgrade to the 2008-2013 option with hardware included, as the 14mm OEM hardware is engineered too small in our opinion.

Replacement parts can be found here.

Product Installation Instructions

Thuren Fabrication 2003-2012 3500 Front Track Bar Instructions

    Customer Reviews

    Based on 21 reviews
    90%
    (19)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    10%
    (2)
    R
    Rusty B
    2007.5 Ram 3500

    Put the bar on a few days ago, haven't driven it much but seems like an improvement. My truck is a 2007.5, so I took the advice of going with the 2008+ track bar. One side was a 14 mm and the other was a 16 mm on the truck. Drilled out the smaller size hole and the new track bar fit perfectly.

    H
    Holly Lewis

    FRONT TRACK BAR RAM 3500 (2003-2012)

    E
    Elvis Preston
    Ram 3500 track bar

    My new to me truck had a 7.5 lift in the front but still retained the factory track bar which led to drivers tire sticking out 2” more than passenger side, not only that the steering was less than optimal with sway constantly. I went with thuren because I heard nothing but good things and it was Not disappointing when I received it. This track bar made a dramatic difference in how my truck handles, no regerts. Would highly recommend.

    C
    Casey Ashworth

    Super stout and easy install

    C
    Christopher Mikulak
    unbelieveable difference

    feels like a whole new truck and rebuild kits are cheap and readily available unlike other brands. only problem is I didn’t even get a sticker to slap on my toolbox for my 400$!

    123