Image of Thuren Fabrication 2014-2022 Dodge Ram 2500 OEM Fit King Steering Damper
Image of Thuren Fabrication 2014-2022 Dodge Ram 2500 OEM Fit King Steering Damper Blue End Cap 1
Image of Thuren Fabrication 2014-2022 Dodge Ram 2500 OEM Fit King Steering Damper Close Up
Image of Thuren Fabrication 2014-2022 Dodge Ram 2500 OEM Fit King Steering Damper Blue End Cap 2
Image of Thuren Fabrication 2014-2022 Dodge Ram 2500 OEM Fit King Steering Damper Misalignment Spacer

2014-2022 Dodge Ram 2500 OEM Fit King Steering Damper

SKU: TF573-09BL

Regular price $280.00
/


7/5/22 NOT GOING TO SEE MORE OF THESE UNTIL MID AUGUST, IF WE'RE LUCKY!

Striving to produce the ultimate steering damper, working together with King Shocks for over a year, we came up with a great product for the Dodge Ram platform.

This damper utilizes a finely tuned damping profile, creating the ideal solution for the best control and feel possible!

Every brand steering damper we've ever tested only started to function when you impact large hits, and did little to nothing to reduce small chatter and road imperfections felt through the steering wheel.

This damper is internally tuned to control every aspect of the driving experience. While steering dampers in the past have been seen as an un-needed component, when it comes to handling and driving safety, this damper completely changes the game.

The small shaft design allows us to ship each damper with the required 100psi minimum needed to control the steering on these very heavy trucks.

Fits:

  • 2014+ Ram 2500
  • 2013+ Ram 3500
  • 2014+ Power Wagon

Email a picture of your damper before ordering to verify fitment.

  • Small shaft high-pressure design.
  • Large COM10 5/8" bore teflon lined bearings.
  • Special loaded-valve piston design which controls even the smallest road imperfections.
  • Machined in house 17-4 stainless bearing misalignment hardware.
  • Easy 15min or less install using all OEM hardware.

Notes: High quality steering dampers are a finicky part to design and set up properly. The main issue is being able to charge the damper with the required 100psi minimum pressure without the damper inducing too much steering push to one side.

If there is less than 100psi pressure charge, the damper can internally cavitate, causing it to momentarily loose function.

Smaller lighter vehicles can use less pressure. The shaft diameter used is directly related to the amount of extra "push" the damper will give. For example a 7/8" diameter shaft damper will give 60lbs force push at 100psi.

This damper with the 1/2" shaft only pushes with 19lbs of force, and with the extra tight seal head the actual push at the steering linkage is reduced to almost nothing.

Customer Reviews

Based on 22 reviews
95%
(21)
5%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Tim barro
Huge Improvement

I put this King stabilizer on my 2022 Ram 2500. It’s lifted on 37s and my tires are super heavy. After putting this stabilizer on, I get zero vibration. This is a must when running larger tires.

T
Travis Meyer
Perfect fit

Purchased for my 2020 Ram Power Wagon. Fit perfectly with factory hardware. Smoothed out the ride on rough roads however, it does cause a very slight pull to the right.

N
Nick A.
Awesome product!

So far, I’ve definitely noticed an improvement compared to the stock steering damper. The bumps that used to cause my steering wheel to shake and jerk can barely be felt now. I think it’s causing a very slight push to the passenger side but I’m not 100% certain. Even if there is a very slight push, it still deserves 5 stars. I couldn’t justify the price for the Fox ats unit. In case you’re wondering, my 2017 Power Wagon is aligned with the Thuren specs, Thuren track bar and 35” tires inflated using the chalk test.

J
Jeremy Peterson

KING DAMPER RAM 2500 OEM FIT (2014-2022)

T
Tom Sharp
King Damper

Perfect fit, easy install. I think it’s a big improvement over the stock damper. It did change my steering wheel position, but holds the truck straight longer than the stock piece.