Thuren Fabrication 14-23 RAM 2500 2 Wheel Drive Trackbar img 1
Image of the Heim Joint end of the 2WD Thuren Trackbar
Image of the Delrin side of the 2WD Thuren Trackbar
Image of the Delrin Bushings with Bushing Sleeve
Image of the Heim Joint on the 2WD Thuren Trackbar
Thuren Fabrication 14-23 RAM 2500 2 Wheel Drive Trackbar img 1
Image of the Heim Joint end of the 2WD Thuren Trackbar
Image of the Delrin side of the 2WD Thuren Trackbar
Image of the Delrin Bushings with Bushing Sleeve
Image of the Heim Joint on the 2WD Thuren Trackbar

2014-2023 Dodge Ram 2500 2 Wheel Drive Trackbar

SKU: TF-RA2X4-FTB

$350.00
/

This Trackbar ONLY fits the 2014+ radius arm solid beam front axle, 2 WHEEL DRIVE trucks with no front differential. You'll know if this is the right trackbar for you, as your OEM original trackbar is perfectly straight like this one shown in the picture, and your truck is not 4 wheel drive.

IMPORTANT!! This trackbar is right at 38-1/8" long center to center mounting bolt to mounting bolt. If your trackbar is closer to 39" long bolt to bolt straight line, instead of 38-1/8", contact us before purchasing to verify what to order.

The OEM 2013+ Track Bar has been upgraded from the previous 2003-2013 design, and is not "mandatory" to replace right away like before. If you are nearing 20,000 miles, you are getting close to needing a Thuren Trackbar as an upgrade.

Our trackbar is designed to be VERY rigid. Often people will think that having a rigid bar will give steering rattle and feedback. Well, it's actually the opposite in this case. Reason being is the trackbar is the only steering support.

If the support (trackbar) deflects, the truck will be allowed to basically steer itself as you encounter bumps/ruts/holes/etc. A rigid trackbar is the only way to know that inputs you make at the steering wheel actually get to the wheels.

Replacement Parts Can Be Found Here

Details:
  • First place to start if your vehicle has ANY strange handling traits
  • Made from 1.50"x3/8" wall 1026 DOM tube
  • Delrin machined frame side bushing
  • CNC machined form-threaded Heim joint tube end
  • Bead blast textured, then highest quality Powder Coated
  • Adjustable length
  • Zerk Grease fitting for frame bushing
  • Extreme duty FK Teflon lined rod end at axle side

    Customer Reviews

    Based on 5 reviews
    100%
    (5)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    B
    Bruce Pauley

    Great upgrade to OEM part.
    Should have put on 100K miles ago.

    A
    Anthony Hall
    Weather delayed Have not installed

    Trackbar seems well built can not can't wait to get it installed to get my axle lined up correctly.

    M
    Miguel Vazquez
    Thuren track bar

    By far some of the best customer service in the diesel truck industry! Not to mention the quality they produce great parts!

    J
    John Markling
    4x2 Track bar was a game changer.

    Total game changer and worth every penny, plus it’s the only 4 x 2 adjustable track bar that I could find for a 2019 ram 2500 Cummins. I ran a 4x4 adjustable track bar for my spacer level for two years while I searched for the right level suspension set up. I went with a 2” Thuren coil and shock set up for the truck, and it is a better than new truck. Totally level too. Rides like a tight 1500 with no glancing whatsoever. Especially with the track bar from these guys. I also run a Fox steering stabilizer and have stock rear coils with some Bilsteins thrown on until I do stock rear coils with the Thuren Fox’s.

    G
    Grind Hard Stay Humble
    (o)(o)'s

    Super Pumped.......
    I had the Death Wobble from Hell......Put on the new Steering Stabilizer from Thuren, the new Drag Link, the Sway bar end kit, and new springs.....swear the truck drives better then when i drove it off the lot. fast shipping, killer customer service.....was texting these dues at 9pm while installing and getting feedback. super pumped