2019-2026 Ram 2500/3500/PW Track Bar Bracket
2019-2026 Ram 2500/3500/PW Track Bar Bracket
2019-2026 Ram 2500/3500/PW Track Bar Bracket
2019-2026 Ram 2500/3500/PW Track Bar Bracket

2019-2026 Ram 2500/3500/PW Track Bar Bracket

SKU: TF-19U-TBFRMMNT

$280.00
/

Fitment:

  • 2019+ RAM 3500
  • 2019+ RAM 2500
  • 2019+ RAM Power Wagon
  • Designed to be used with the Thuren Fabrication Trackbar.
  • Does not function with the OEM Trackbar.
  • May function with other brand aftermarket Trackbars, but we have no information on fitment regarding other brands.

Details:

  • Bracket is Laser Cut welded steel.
  • Powder Coated finish.

On the 2019+ Ram 2500, 3500, and Power Wagon platforms, the bolt-on frame mount that comes on the truck from OEM, is made from Aluminum. The OEM Aluminum bracket is plenty strong, but we have found that when using an aftermarket Track Bar like ours, the very high mandatory mounting bolt torque combined with the smaller surface area crush sleeve ends, can make the sleeve compress the aluminum.

When this happens it's virtually impossible to keep the Track Bar frame side mounting bolt tight. Our bracket is basically just a copy of the factory aluminum mount, but just made from steel for a bit more long term durability.


Included:

  • Thuren Steel Trackbar Bracket (x1)
  • Locknut (x2)
  • Washer (x2)

    Customer Reviews

    Based on 11 reviews
    91%
    (10)
    9%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    J
    Jg
    Great aftermarket piece

    Had to drill out the holes on the bracket that the 2 grade 8 bolts go thru and get 2 new lock nuts since the ones sent by Thuren were wrong and metric threads. Overall its a great piece and should hold up a lot better than factory, just sucks when it doesnt just 'bolt right in' with no problems

    K
    Kyle P
    Better than stock

    With the factory bracket being aluminum and needing to torque to 215ftlbs it tends to bend over time and lose torque. With this steel bracket it keeps the torque accurate.

    D
    Dominic Mongillo
    Per Usual Thuren Fab Never Disappoints

    Pw Track Bar Bracket is a large step up the Aluminum Oem .
    Tips ,
    Remove DS Sway Bar end link and you gain easier access
    Installation was straight forward and couldnt be happier .

    C
    Caleb
    2019 Ram 2500

    Great HD bracket. Just be prepared to unbolt the sway bar links if you have the Thuren sway bar kit as well as making sure you have a crescent wrench to fit between the coil spring and the frame for one of the bolts. Just used another wrench for leverage on that one. Would be a great time to check your track bar bushing as well

    S
    Spencer Luth
    Awesome

    I have always had an issue getting my mounting bolt to 215ft lbs with the new bracket it snugged up no problem and didn’t feel like it was going to break 10/10 it is so much heavier then the stock one too. Sucks ram cheeps out on everything

    123