Thuren Fabrication 13-22 Front Track Bar img 4
Image of Thuren Fabrication 2003-2013 Dodge Ram 2500 Front Track Bar Heim End
Image of Thuren Fabrication 2003-2013 Dodge Ram 2500 Front Track Bar Delrin End
Image of Thuren Fabrication 2003-2013 Dodge Ram 2500 Front Track Bar Delrin Bushing and Center Pin
Thuren Fabrication RSMX12T Track Bar Heim Joint img 4

2003-2013 Dodge Ram 2500 Front Track Bar

SKU: TF-4LFTB-16MM

Regular price $400.00
/


If you are having any steering or handling issues, our Trackbar upgrade is the first place to start! Our Trackbar is designed to be very rigid, with as close to ZERO deflection as possible.

Often people will think that having a rigid track bar will give steering vibration and rattle, but this is simply not true, being that the Trackbar is the only support for the steering linkage. The less deflection in the Trackbar, the less deflection in the steering. Simple as that!

Fitment:

  • If you have a 2003-2007 truck, read the below bolt size note before ordering!!
Details:

  • Everything except the Heim Joint and hardware is manufactured in house from raw materials.
  • Made from 1.50"x3/8" wall 1026 DOM tube.
  • Delrin machined frame side bushing.
  • CNC machined form threaded Heim joint tube end.
  • Bead blast textured, then high quality Powder Coated.
  • Adjustable length (within spec)
  • Grease fitting for frame bushing.
  • Extreme duty FK Teflon lined rod end at axle side.
  • DOES NOT FUNCTION WITH LARGER AFTERMARKET DIFF COVERS!!!!!

Note: From 2003 to approximately 2007.5, these trucks used 14mm(shank size) bolts on both ends of the Trackbar. Then around the middle of 2007, some trucks were coming with a 14mm bolt on the frame side and a 16mm bolt on the axle side.

If you have a 2003-2007 truck and you're unsure if you have mismatched hardware, you should purchase the above 2008-2013 option with hardware included, and plan to possibly drill out the mounting flange(s) to a bigger 5/8"(16mm) hole.

Regardless, If you have a 2003-2007 truck, we highly recommend you upgrade to the 2008-2013 option with hardware included, as the 14mm OEM hardware is engineered too small in our opinion.

Replacement parts can be found here.

Product Installation Instructions

Thuren Fabrication 2003-2013 Front Track Bar

    Customer Reviews

    Based on 139 reviews
    95%
    (132)
    2%
    (3)
    0%
    (0)
    0%
    (0)
    3%
    (4)
    K
    Kyler
    Highly Recommended

    I have the Thuren 2” soft ride coil springs and Bilstein shocks along with a steering box brace on my 09. Steering still had some slop in the wheel. After adding the Track Bar it’s made a huge difference. Tighten up the front end and eliminated the wondering I used to have. Definitely would recommend and will buy again.

    K
    Kenneth Freligh
    Death wobble fixed!!!

    This is awesome, I have a 2007 Dodge 2500 and it started getting the dreaded front end wobble when I went over everything. I took it to TWO dealers (Dodge and Ford) both had it in twice each and between them I had a track bar, ball joints done twice and the stabilizer shock replaced and nothing fixed. I saw on some site where this worked for them and I have it a try. From start to finish four hours and that’s drilling out for larger hardware and recentering my steering wheel. I wish I would’ve done this first it would have saved me tons. Thank you Thuren Fabrication.

    S
    Steven Moore
    Track bar

    Did what it’s supposed to do. Great quality and solid product.

    R
    Roque Pinheiro

    The person I talked to on the phone Zeb was great to talk to you. All the questions are showing you all the answers to my questions and it’s nice to still be able to call a company and somebody actually answers the phone not an answering service and every time I call he’s always been there and he’s great person so I like to thank you and your company for hiring him good person. Thank you.

    S
    Sammy Dervishi
    Track bar

    Ordered 3” springs and track bar. Quality if very good however the setting specs are not correct. Original track bar meassures at 39” and track bar adjustment calls for 39 1/8 with is nothing and axle is still 1” off left. Took it back down and adjusted to 39 1/2 to get it to sit right with lightly left on the axle.